Grandtec Grand Ip Camera Pro Driver

Download File ---> https://tinurll.com/2tzHSj

How to Install and Use Grandtec Grand IP Camera Pro

Grandtec Grand IP Camera Pro is a wireless or wired IP surveillance camera that you can access over your home or office network, or use your browser to remotely view and monitor from anywhere in the world. It has a high resolution image processor, 6-LED infrared for night vision, and supports various network services. In this article, we will show you how to install and use Grandtec Grand IP Camera Pro.

Step 1: Install the Device Driver

Before you can use Grandtec Grand IP Camera Pro, you need to install the device driver on your computer. You can download the driver from this link. The file name is upgrade.exe. After downloading, run the file and follow the instructions to install the driver. You may need to reboot your computer after the installation.

Step 2: Connect the Camera to Your Network

There are two ways to connect Grandtec Grand IP Camera Pro to your network: wireless or wired. For wireless connection, you need to have a wireless router that supports 802.11g/b Wi-Fi. For wired connection, you need to have an Ethernet cable and a network port on your router or switch.

For wireless connection, follow these steps:

Plug the power adapter into the camera and an electrical outlet.

Press and hold the reset button on the back of the camera for 10 seconds until the LED flashes red and green.

Use your computer or smartphone to scan for available Wi-Fi networks and connect to the one named \"Grand IP Cam\". The default password is \"12345678\".

Open your browser and enter \"192.168.1.100\" in the address bar. You should see the camera's web interface.

Go to \"Network Settings\" and select \"Wireless LAN Settings\".

Click \"Scan\" and choose your Wi-Fi network from the list. Enter your Wi-Fi password and click \"Submit\".

The camera will reboot and connect to your Wi-Fi network. You can unplug the power adapter and place the camera anywhere within the Wi-Fi range.

For wired connection, follow these steps:

Plug the power adapter into the camera and an electrical outlet.

Connect one end of the Ethernet cable to the camera's LAN port and the other end to your router or switch.

The camera will automatically obtain an IP address from your router or switch. You can check the IP address on the label at the bottom of the camera or use a network scanner tool such as IP Cam Finder.

Open your browser and enter the IP address of the camera in the address bar. You should see the camera's web interface.

Step 3: View and Monitor Your Camera

Once you have connected your camera to your network, you can view and monitor it from any device that has a browser and internet access. You can also use Microsoft MSN or NetMeeting to chat with your camera.

To view and monitor your camera from a browser, follow these steps:

Open your browser and enter the IP address of your camera in the address bar.

You should see a live video stream from your camera. You can also adjust various settings such as image quality, motion detection, alarm notification, etc.

To view and monitor your camera from MSN or NetMeeting, follow these steps:

Open MSN or NetMeeting and sign in with your account.

Add your camera as a contact using its IP address as its email address. For example, if your camera's IP address is 192.168.1.100, then its email address is 192.168.1.100@grandipcam.com 061ffe29dd